Installation guide

Unpacking the Unit

Unpack the unit, taking care not to damage the surfaces.

Check the product for any signs of damage in transit.

Installation Requirements

Once you have unpacked the unit, make sure you have the following:

 The display monitor that you are going to mount the touch overlay onto.

 The computer that runs your software application, including the cable that

connects the computer to the display screen.

 The USB or serial cable to connect the touch overlay to the computer.

For the serial option, you also need:

 Serial cable.

 Power adaptor.

 Serial communications software.

Safety Notes

 The touch overlay contains glass that can add significant weight,

especially for large-format displays. It is essential that the monitor’s stand

is strong and stable enough to support the combined weight of the touch

overlay and monitor.

 For a large screen, you need two people to install the touch overlay

safely.