Computer Hardware User Manual

DDR3THIN-MN-XXX 17 Doc. Rev. 1.11
3.5.2 LEASH probe to NEX-PRB1X/2X connection
Figure 3 – LEASH probe to NEX-PRB1X/2X connection
3.5.3 Alternate use of NEX-PRB1X or NEX-PRB2X probes
The NEX-PRB1X or NEX-PRB2X can be used in place of the “-T” probes but will have to be
secured for long term connection by tie-wraps.
Two each plastic
Spacers
Screws
&
Nuts
Hold each probe
together
Transition board on the “LEASH”
Cable end
Probe tip on the NEX-PRB1X-T or
NEX-PRB2X-T
Interposer
here