User Manual 1
Table of Contents Safety Information ......................................................................................................................... 3 Appearance and Key Function ................................................................................................... 5 Introduction ..................................................................................................................................... 7 Call Functions .........................................................
FM Radio ........................................................................................................................................ 26 Settings .......................................................................................................................................... 28 Storage ...........................................................................................................................................
Do not use your mobile phone around fuels or chemicals. Explosion Hazard Please observe related limitations and do not use your mobile phone around an area where explosions may occur. Accessories and Batteries Please use only Blu authorized accessories and batteries. Backup Please remember to keep a written record of all important information. Water Your phone is not waterproof. Keep it away from water and liquids. SOS Emergency Calls Make sure your mobile phone is switched on and in a service area.
Appearance and Key Function USB jack Earphone jack Front Camera Power Volume Back Menu Home 5
Flash Rear Camera Speaker 6
Introduction Installation of the SIM Card Please install the SIM card before using your phone. Note: Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please be cautious when carrying, installing or taking out the SIM card. To insert SIM card(s): 1. Switch off the mobile phone and remove the rear cover. 2. Insert the SIM card(s) SIM Slot(s) 3. Replace the rear cover of the mobile phone and power on.
Power On and Off On - Please ensure the SIM card has been properly inserted into the phone. Long press the Power key to switch on the phone on. Off - In standby mode, long press on Power key until an options menu appears. Select OFF in the menu and confirm Password Lock You may set a screen unlock picture or a PIN code lock as a security measure. For further information regarding password locks, password revision and other functions please enter the security settings of the phone.
Call Logs Every telephone number called and received will be saved in the phones call log. There will be an indicator in the call logs that will display SIM1 or SIM2. All numbers in the call log can be dialed directly by clicking the dial icon on the right side of the screen. When the number appears on the list, click it to view details. Proximity Sensor The proximity sensor determines how far away an object is from the device.
prevents inadvertently touching. Contacts Enter: Click on the applications menu and select contacts • The default display is the phone contacts and SIM card contacts • The contacts are organized alphabetically by default.
Search Add Contact Click the Search icon to enter the contact search interface. Any numbers or letters associated with any of the contacts saved in the list will be shown in the search results. If there were no matches for the inputted contact, the interface will display no contacts found.
1. Click “Add Contact” icon 2. Select to save contacts to phone or SIM card 3. You may edit contact picture, name, telephone number, group, address, and email among other options 4. Click to finish and save contact.
Messaging You may use this function to exchange text messages and multimedia messages with your family and friends. The messages to and from the same contact or phone number will be saved into a single conversation so you may see the entire message history conveniently. Send an SMS Application Menu » Messaging » New message (or use shortcut icon) 1. Click to enter recipient (You may enter contacts from contact book or enter a new number) 2. Compose Message 3.
Internet Browser Menu Functions Backward After browsing through multiple pages, this option will return the user to the previous page. Forward After browsing through multiple pages, this option will move to a web page after the current page. Windows You may view all windows open by clicking the windows icon in the upper right part of the browser. Bookmarks Click the Bookmarks option to make the current URL as a saved Bookmark. Click Bookmarks to opened saved bookmarks.
Settings: Contains a variety of browser settings.
Bluetooth Bluetooth is a short-range wireless communications technology that devices can use to exchange information and connect to different types of devices which include headsets, car kits, and other devices. Power on Bluetooth 1) Settings » Wireless & Networks » Bluetooth and select to power on Bluetooth. 2) The Bluetooth icon will appear grey in the in the notification bar. Click “scan for devices” and the phone will start to scan for all devices within range.
List of available devices Camera Camera Prior to use: Install memory card before using the camera or video camera. All photos or videos taken by the phone are stored in the memory card.
1. Applications Menu » Camera 2. Switch to video mode if you want to record videos. Note: You may also place a camera shortcut on any of the screens Take photos 1. In the All Apps screen, touch the Camera icon to open the camera. 2. Tap the icon to take photos after the view is satisfactory. To view it, slide the screen to the left or just tap the picture in the right corner of the screen. Record video clips You can use Tap the icon to change from Camera to Camcorder or vice versa.
Camera Options Select from Camera or Video Gallery Open Images Applications Menu » Gallery Share Pictures You may share pictures by sending them through Gmail or the E-mail application.
pictures through the MMS message function by composing a message and attaching the picture. Any image can also be sent via the Bluetooth function by selecting Bluetooth equipment that has been paired. Adjust Image Press Menu and Edit to adjust images Edit light: Fill Light, Highlights, Shadows, Auto-Fix. Edit image effects: Cross-process, Posturize, Logo, Documentary, and Fish Eye. Color Effects: Warmth, Saturation, B&W, Sepia, Negative, Tint, Duo-tone, Doodle.
Open Music Application Menu » Music Player Options Song Controls Song Status Search Music You may choose to search for music from media folder through artist name, song name, album name. The following formats are available: AMR, M4A, MIDI, MP3, WAV, and OGG.
Sound Recorder The Sound Recorder can record voice or any audio. You may send any recorded audio via Bluetooth or MMS and also have the option to make any recorded audio the phones default ring tone. Notice: The recorder only uses AMR 3GPP format. Record - Keep the phone’s microphone near the voice source. - Click the record button to record the audio. - Click the stop button to stop recording the audio. All recordings will be saved in my recording folder in the default music program.
Recording Time Recording Controls 24
Alarm Clock 1. Click on the Clock icon in the application menu 2.
FM Radio FM Radio Through this function, you may listen to FM radio on the device. The FM radio uses the wired headphones as an antenna in order to receive signal. Before using this function, connect the original equipment headphones that came with the phone. Open FM radio Press the FM Radio icon to open the application. - Tap or - Tap / to scan for available FM channels. to change the frequency by +/–0.1 MHz. - Press the Volume Keys to adjust the volume.
Radio Options Scan FM Radio as Background Click on the Home key to move the FM Radio program to the background.
Settings Wi-Fi / WLAN Wi-Fi » Wi-Fi settings » Click Wi-Fi to power on. When switched on, the Wi-Fi will automatically search for available networks. Any unsecured network can be used directly and any secured network requires a password or credentials prior to connection. Bluetooth Press the switch to power on Bluetooth. Once on, the Bluetooth will automatically scan for any nearby open equipment. Data Usage Data usage and mobile data traffic limit.
Mobile networks and APN Settings Note: When in flight mode, Wi-Fi will turn off automatically. Sound & notification This option sets the phone tone settings for receiving calls or notifications. Some of the settings include Vibrate, volume, ring tones, ring tones notification and haptic feedback tones Display (a) Brightness (b) Auto rotating screen (c) Wallpaper (d) Screen Timeout Storage View the SD card and phone memory usage. Allows the removal or formatting of the SD card.
Use wireless - Use wireless services to find locations in applications. When using the GPS satellite positioning, set accuracy to street level (Cancel it to save battery). Security Set up screen locks: Use a pattern, PIN or password to lock the screen. Pattern: The first time there will be simple unlock instructions and examples. Click “next step” to continue the security pattern step. PIN: Enter PIN number to unlock the screen. Password: Set password to unlock the screen.
Use security credentials - Allow applications to visit security credentials or other credentials. Install from SD card - Install the encrypted certificate from SD card. Language & Input Language – Change the language of the phone. Custom Dictionary - Add or delete words to the custom dictionary.
Power button ends call Speak Passwords Touch Delay Developer Options If the phone does not display Developer options, to access: Press ‘Build number’ seven (7) times in the about phone tab in settings. The developer options gives access to USB Debugging and other developer options About Phone You can check the information on status and remaining power You may periodically check for any software or firmware updates through the System Updates option.
Some system settings and user interface (UI) options may vary depending on final SW version. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
requirements). The maximum scaled SAR in hotspot mode is 0.948W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.