Thanks for choosing NX188 products. For the safe and efficient operation of this product, please read this manual and other materials carefully before you first operate it. NX188 shall bear no liability for any losses caused by improper operation of this product not in compliance with the instructions and requirements of this manual or by your misunderstanding of this manual, except for losses caused by the improper installation or operation of NX188 professional maintenance staff.
The content of this Manual is protected by copyright law. Without the prior authorization of NX188, you are not permitted to duplicate or copy this Manual in any way, transmit in any way via wired or wireless networks or translate it into any other languages.
Contents 1 . Attention and Precautions ----------------------------------------------------- 5 1.1 SAFETY PRECAUTIONS ...................................................................... 5 1.2 PRECAUTIONS WHEN USING PHONE ................................................... 5 1.3 PRECAUTIONS WHEN USING BATTERIES ............................................. 6 1.4 PRECAUTIONS FOR CHILDREN............................................................. 6 2 .
.10 CREATE A NEW SHORT MESSAGE .................................................... 19 4.11 CREATE A NEW MULTIMEDIA MESSAGE ........................................... 19 4.12 ADD NEW CONTACT ....................................................................... 20 4.13 NETWORK SETTINGS ..................................................................... 20 5 . Menu tree -------------------------------------------------------------------------- 21 6 .
1 . Attention and Precautions Please read these brief rules. Violation of these rules might cause danger or break laws. 1.1 Safety Precautions Road safety comes first When driving, care must be taken for using phone; if driving conditions are poor, please pull up at road side to use phone. Power off your phone in hospitals Please abide by relevant regulations or rules. Please power off when close to medical equipment. Power off your phone in aircrafts Wireless phones can cause interference.
Use sensibly Use phone only in its normal position. Please do not touch antenna area unless necessary. Use qualified servicing Only qualified maintenance staff can assemble or repair the equipment. Waterproof Your phone is not waterproof, please keep it dry. Emergency calls Make sure the phone is powered on and in service. Input emergency service number and press Dial key, give your location and do not end the call until told to do so. 1.
2 . Your Phone Description of keypad keys 1, Direction key The key is split into 4 directional keys: up, down, left and right. Move the curser up, down, left and right in edit mode. Press the directional key in idle interface to enter the corresponding function interface.
Key: to access the Multimedia. 2,Left soft key Carry out the functions of the indicator showed at the lower left corner of the monitor. In standby mode ,press this key enter to the main menu. 3, Dial key Dial or answer a phone call. 4, # key This key has different functions in different state or function menus. 5, OK key In standby mode ,press this key enter to the Browser. 6, Right soft key Carry out the functions of the indicator showed at the lower right corner of the monitor.
Screen Icons Icons Description Location Signal strength indicator GPRS Connected Icons Area Icons Area Alert Type is Ring Icons Area Alert Type is Vibration Icons Area Alert Type is Vibration and Icons Area Ring Alert Type is Vibration then Icons Area Ring Alert Type is Silent Icons Area Unread SMS Icons Area Unread MMS message New WAP Push Icons Area Icons Area Alarm Enabled Icons Area Call Divert Unconditionally Icons Area Battery level Icons Area New missed calls Icons Area Key
3 . Getting Started 3.1 Installing the SIM Card and the Battery Ensure that the golden contact area on the SIM card is facing downward, and the beveled edge is properly aligned with the SIM card slot. 3.2 Removing the Battery and the SIM Card Before removing the battery and the SIM card, ensure that your phone is powered off.
Charging Battery While charging, the power supply indicator at phone’s screen icon zone will flash in a rotation manner, if the phone is off while charging, a charging screen will still appear, indicating that the phone is recharging. If the phone is still being overused while the power supply is insufficient, the recharging indicator will appear on the screen after the recharging has started for a while.
might cause danger, which also violates warranty terms prescribed by the manufacturer. If the charging temperature is too high or too low, the phone will automatically give warning and stop charging, so as to prevent damages to battery or dangers. 3.3 Connecting to Network SIM card A valid SIM (Subscriber Identity Module) card must be inserted in the phone before using it.
3.5 Power on/off phone To power on or power off phone, please press and hold the End key. Then the screen will display the following prompts in sequential order: Enter phone password – if you have set up phone lock password. Enter PIN – if you have set up SIM card password. Search – the phone will search till finding appropriate network connection. 3.6 Unlocking SIM card To prevent illegal usage, PIN (Personal Identification Number) code is adopted to encrypt for protection of your SIM card.
The phone lock protects your phone from unauthorized use. The default phone lock code is 1122. You can change it into any numeric string of 4 to 8 digits. If the phone lock function is enabled, you need to enter the correct phone lock code when the phone is powered on or in the standby mode. 3.8 Connecting to network After SIM card is successfully unlocked, the phone will automatically search available network (with searching showing on the screen).
4 . Basic Functions 4.1 Making a call When the logo of service provider appears on the display screen, you can dial or receive calls. The info bar at the upper left corner of the display screen shows network signal strength (when there are 5 info bars the signal is at its strongest). The call quality is very likely to be affected by obstructions; therefore movement in a small area can effectively improve call performance. 4.
4.4 Dialing international calls To make an international call, you may press 0 key to power continually, till the screen displays the pre-digit symbol "+" for international long distance call, which will enable you to make a call from any country without knowing the local international access code. You can enter numbers in the following sequence to make an international call: + Country code complete phone number Dial Key.
4.6 Emergency calls As long as in the network service range (which can be confirmed by checking the signal strength bars on the top left corner of the screen), you can always call emergency service. If your network supplier does not provide roaming service in your area, the screen will display "Emergency", to inform you that only emergency call is permitted. If you are within the network service range, you can also make emergency calls even without the SIM card. 4.
off speaker. Operation methods of call options are the same with that of Function menu. This call options can only be viewed during call process, moreover, the functions of call waiting, call holding, and conference calls need service support, please contact your service provider for details. In the call options, you can make the following operations: Hold Single Make the current call hold. End Single End the current call. New call Enter new dialing interface. Phone book Enter Phone book menu.
into multiple party call, maintain the multiple party call, talk privately with one party of the conference while maintaining all other callers, connect one party in the call conference with another party while exiting the multiple party call oneself, maintain one party of the multiple party call and end current call and all other maintained calls. Note: The menu marked * items will only appear in special circumstances.
4.12 Add new contact 1. Select Phone Book and then select Add number. 2. Select To SIM or To phone for saving the contact. 3. Edit contact. If you want to save to SIM, you can only edit name and number. 4. Finish editing, press right soft key (Done), pop-up message to preserve the contact person. 5. Press left soft key(Yes)to save; press right soft key(No)to exit. 4.13 Network Settings Setup the data account: 1. Select “Menu > Services > Data Account”. 2. Select your service provider from list.
5 .
6 . Input method 6.1 Entering Eng (ABC and abc) In the "ABC" or "abc" input mode, you can press a key labeled the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. 6.2 Entering Numbers In the "123" input mode, press a key labeled the desired number. In the "ABC" or "abc" input mode, press a numeric key repeatedly until the desired number appears on the screen. 6.3 Entering Symbols To any input modes, press * key to display a symbol list.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This mobile device meets guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.