Install Instructions

Projector Mounting

For these steps you will need the following:

• Universal Adjustment Bracket

• Universal Mounting Bracket

• Carrier Shroud

• Projector

• Projector Mounting Hardware (Not Included)

• (1) M8 Nyloc Nut (Already Attached)

• (4) 5 x 14mm FHMS Screws

• (1) Flat Washer (Already Attached)

• 3mm Allen Key or T-Handle (Provided)

Step 11: Remove the M8 Nyloc Nut from the Adjustment

Bracket then attach the Projector to the Mounting Bracket

and center the Mounting Bracket on the Projector.

Important Note: Due to the large variety of Projectors, we are

unable to provide the hardware required to mount the

Projector to the Mounting Bracket. Contact the Projector

manufacturer or reference the User Guide for screw sizing.