Installation Guide

Upper Actuation Assembly

For these steps you will need the following parts:

 Upper Lift Column

 Center Riser Bracket

 Upper Column Brace

 6 x 12 FHMS Screws

 6 x 20 mm FHMS

 Small Hex Key

Step 13: Attach the Upper Lift Column to the Center Riser Bracket using (4) 6 x 20 mm FHMS Screws. Ensure that the

pigtail cable for the Upper Lift Column is facing the interior of the Center Riser Bracket. Refer to picture 13.

Step 14: Attach the Upper Column Brace to the Center Riser Bracket using (2) 6 x 12 mm FHMS. Refer to picture 14.

Step 15: The Upper Actuation Assembly is now complete.