Installation Guide

27
How to Properly Install a Lid “Catch” with a Nexus 21 Lift System
Down below are a few examples. Using the
provided Lid Catch Brackets with (8) #10 x ¾”
THWS attach the brackets to each corner of the lid
opening. This will provide a support point for the
lid to rest on while the lift is in the fully retracted
position, assuring the lid is flush with the rest of
the cabinetry every time.
There are multiple ways to properly create a “catch” for the lid to rest on, when the lift is in the
fully retracted position.
Here are a few other examples on how to create a “catch” or “lip” for the cabinet lid to rest upon.