Installation Guide

8
1
2
4
Building the Lift System
Lower Actuation Assembly
For these steps you will need the following parts:
 (2) Lower Lift Columns
 (2) Base Plates
 (2) Lower Column Supports
 (8) 6 x 10 mm BHMS Screw
 Small Hex Key
Step 1: Attach (1) Base Plate to the Lower Lift Column using (2) 6 x 10 mm BHMS screws. Refer to picture 1.
Step 2: Attached (1) Lower Column Supports to the Lower Lift Column using (2) 6 x 10 BHMS screws. Refer to picture 2.
Step 3: Repeat steps 1 and 2 for the second column, this time attaching the Base Plate to the alternate side.
Step 4: The Lower Actuation Assembly is now complete.