o 60 o 40
4.
09:32 09:32 Wi-Fi UseWi-Fi Wi-Fi BlueBooth Location cts-4 cts-2 Do Not Disturb Headset Volume cts-3 cts-5 cts-6 Screenshot Screen Recording Screen Cast cts-7 cts-8 cts-9
You can buy a safety lock to lock in Kensington lock to protect your phone.
After the phone is supplied with power, it automatically begins the initialization process. After start up, the phone is ready for use. TM The phone uses Android 1 native idle screen by default. 2 09:32 09:32 3 Oct.
Status indicator The red light is on during the initialization process, then off after entering the idle screen. And it is reserved for certain App. Camera indicator The green light is on when the camera is on, otherwise will be off when camera is off.
1 09:32 search APP 2 3 4
1 09:32 09:32 2 Oct.
09:32 09:32 Thu.sep 10 Wi-Fi BlueBooth Location NO NOTIFICATIONS Do Not Disturb Headset Volume Screenshot Screen Recording Screen Cast Brightness bar Headset Wi-Fi Volume Bluetooth Screenshot Location Screen Recording Do Not Disturb Screen Cast • handset mode: Pick up the handset and automatically switch to handset mode. • 3.5mm headset or RJ9 headset mode: connect 3.5mm headset or RJ9 headset, click to switch to headset mode, click again to exit headset mode.
USB Headset mode Wi-Fi Microphone mute Network connection Do Not Disturb Bluetooth Floating Button Navigate to Settings->Display->Advanced->Floating button->Display on the Screen, you can display or hide floating button. (1) 3.5mm headset or RJ9 headset mode:Click to switch to headset mode, click again to exit headset mode. (2) Microphone mute:Click to mute the microphone, click again to unmute the microphone. (3) Volume up:Click (4) Volume down:Click to increase the volume.
. . . . . . . . . . . . . . . .
. . . . . . .
IMPORTANT NOTE Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC PART 68 HAC statement (1) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
Trademark Google and Android are trademarks of Google LLC.