Installation Manual

9
CONNECT TO YOUR WI-FI NETWORK
1) Switch to Nexx Garage app.
2) Select your home Wi-Fi network and enter the password.
3) Verify your Wi-Fi network and password.
4) Save your configurations.
After applying these settings, your Nexx Garage device will reboot.
The LED light should blink several times. When the LED light is off,
your device has successfully connected to your Wi-Fi network.
Note:
If your device continues to blink, press the reset button on the device
for 5 seconds until the LED light becomes solid green. Then repeat
the above described process.