User Manual

Nexxt Solutions - Outdoor Wireless IP Camera
23
Number to be dialed: the number which will be dialed
once the alarm is triggered.
Test: click Test to make sure this setting is functional.
SMS modem: when an alarm is triggered, the pro-
gram will send a Short Message Service transmission
to the assigned phone through the modem.
This service requires an SMS modem to be installed
on the PC.
SMS modem port: the serial port number which is
attributed to the SMS modem.
Receiving phone number: the enabled-SMS land line
or mobile phone number which will receive the
incoming message when the alarm is triggered.
SMS interval (in minutes): deļ¬nes the time interval
in minutes that the SMS alerts will go off while the
alarm is active.
Test: click this button to test this service, the
program will send a SMS to the assigned phone
number.