User Manual

Nexxt Solutions - Outdoor Wireless IP Camera

To add cameras to the LAN

Click ‘The 2nd Device’ and double click the IP

camera from the ‘Device List in LAN’. The Alias,

Host and HTTP Port will ﬁll in automatically. Enter

the correct User Name and Password then click

‘Add’. Repeat the same procedure to add additional

cameras.

To add cameras to the Internet

First make sure the camera added can be

accessed on the Internet with the IP address or

DDNS domain. (for example: http://XXX.XXX.XXX.

XXX:81 or http://ipcamera.dyndns.org:81).

Enter the Host in the format: XXX.XXX.XXX.XXX

port: 81 or Host: ipcamera.dyndns.org port: 81.

Enter the correct User Name and Password

followed by ‘Add’. Repeat the same procedure to

add more cameras.

Basic Network Settings

If the router that the IP camera connects to has

a DHCP function, you can choose ‘Obtain IP from

DHCP Server’ or you may ﬁll in the network

parameters manually.

HTTP Port - In most cases, you can leave this value

as 80; however, if your Internet Service Provider

blocks this port, you may have to switch to another

port number, such as 8005.

Wireless LAN Settings

Enter the wireless settings page of the Wireless

Router to ﬁnd out the SSID, Channel, Encryption and

Authentication details. This product supports WEP

and WAP security encryption methods.