User Manual

Nexxt Solutions - Outdoor Wireless IP Camera

1: Obtain the WAN IP from a Website

You can discover this easily by turning on a

computer using the same connection as the IP

camera and entering this address: http://www.

whatismyip.com.The page at this address will show

you the current WAN IP.

2: Obtain the WAN IP address from the router

Accessing the IP Camera over the Internet

Users can access the IP Camera from the Internet.

Enter the WAN IP address and port number into the

browser. For example, http://116.25.51.115:85.

Note: Make sure Port mapping is successful. Port

mapping can be conﬁgured in two ways:

• Enter the setting page of the router which the IP

camera connects with to enable the UPNP func-

tion. To do so, open the IP camera “Upnp Settings”

Obtain the IP address of the router (LAN Gateway

address), User Name and Password for logging

into the router.

Enter the LAN IP address of the router

(ie:192.168.1.1) in the address bar of your PC

browser to log on to the router.

Open the Status page to ﬁnd out the WAN

address of the router. In this example, the address

is 116.25.51.115.