User Manual

Nexxt Solutions - Outdoor Wireless IP Camera
54
In addition, you can see the list of problems below,
as it contains the solution to the most common
problems encountered while setting up the camera:
What do I do if I have forgotten the administrator
User Name and/or password?
To reset the administrator User Name and
password, press and hold down the RESET button
for 5 seconds. Release the power button and the
User Name and password will be reset back to their
factory default configuration.
Default administrator User Name: admin
Default administrator password: no password
IP Address configuration
Check whether the IP address of the IP Camera
server shares the same subnet as your work sta-
tion: Click My Computer > Control Panel > Network
& Dial-up Connections > LAN > Attributes >Internet
Protocols (TCP/IP), and check the IP Address and
Subnet Mask. Make sure they are in the same
subnet when configuring the camera’s IP address
manually if you are unable to access IP Camera via a
web browser.
Network Configuration
Double check to ensure that your HTTP server
software is configured and running properly. If you
are running any firewall software, make sure it is
allowing inbound connections to port 80. Also, if you
happen to be using a cable/DSL router, verify that
you have set up the port forwarding feature
properly (consult your router’s documentation for
more information).