User Manual

Nexxt Solutions - Integrated Wireless IP Camera
39
UPnP Settings - Access this page to find out if the
UPnP (Universal Plug and Play) is working correctly on
your computer.
Upgrade Device Firmware - Upgrade the camera’s
Firmware and device embedded web UI software on
this page.
Restore Factory Settings - Restores the original
settings of the device.
Reboot Device - Reboots the device.
Multi-Device Settings
In the Multi Device Settings page, the user can
visualize all devices detected in the LAN. The firmware
inside the camera supports up to 9 cameras
monitoring at the same time. You may view either
9 or 4 cameras at once in a grid on one screen, or
choose to view a single camera at a time.
The ‘1st device’ is the default IP camera. You can add
more cameras to the list in the network for
monitoring different areas.