User Manual

Nexxt Solutions - Integrated Wireless IP Camera
50
Note: Make sure Port mapping is successful. Port
mapping can be configured in two ways:
•EnterthesettingpageoftherouterwhichtheIP
camera connects with to enable the UPNP function.
To do so, open the the IP camera “Upnp Settings”
dialog box, and make sure the status for “Upnp is
successful”.
•IfyourrouterhastheVirtualMapfunction,enter
the router settings page, add the IP camera’s IP
address and port number to the Virtual map list.
How to use DDNS
When using ADSL, the IP Camera will connect to
the Internet through ADSL automatically. For each
ADSL reconnection, your Internet Service Provider
will re-assign a new IP address for the IP Camera to
facilitate the access. DDNS (Dynamic Domain Name
Server) can map the dynamic IP address of an IP
Camera to a fixed domain name. Therefore, we can
access the IP Camera by the fixed domain name
whether the IP address changes or not. The IP
address is not necessary when using the DDNS via
the domain name to find your network.
1. Go to the website that provides free domain
names, such as http://www.dyndns.com. Register
to apply for a free domain name.