User Manual

Nexxt Solutions - Integrated Wireless IP Camera
53
Frequently Asked Questions
Note: Please check network connections first to
troubleshoot any potential problems. Check if any
LED on the network, server, hub, exchange or
network card is showing signs of malfunction. In
case of abnormal operation, verify that all connec-
tions on the network have been done correctly.
In addition, you can see the list of problems below,
as it contains the solution to the most common
problems encountered while setting up the camera:
What do I do if I have forgotten the administrator
User Name and/or password?
To reset the administrator User Name and pass-
word, press and hold down the RESET button for 5
seconds. Release the power button and the User
Name and password will be reset back to their
factory default configuration.
Default administrator User Name: admin
Default administrator password: no password
IP Address configuration
Check whether the IP address of the IP Camera
server shares the same subnet as your work
station: Click My Computer > Control Panel >
Network & Dial-up Connections > LAN > Attributes
>Internet Protocols (TCP/IP), and check the IP
Address and Subnet Mask. Make sure they are in
the same subnet when configuring the camera’s
IP address manually if you are unable to access IP
Camera via a web browser.