User Manual

Nexxt Solutions - Integrated Wireless IP Camera
54
Network Configuration
Double check to ensure that your HTTP server
software is configured and running properly. If you
are running any firewall software, make sure it is
allowing inbound connections to port 80. Also, if you
happen to be using a cable/DSL router, verify that
you have set up the port forwarding feature
properly (consult your router’s documentation for
more information).
If none of these seem to be the problem, it is also
possible that your ISP is blocking inbound connec-
tions to port 80 - many ISPs have done this because
of internet worms, such as Code Red. If this is the
case, you will have to setup your HTTP server on an
alternate port (such as 8080).
Picture Problems
Video streaming is transmitted by the ActiveX
controller. If the ActiveX controller is not installed
correctly, no video image will be seen.
There are two ways to solve this problem:
1. Install the ‘IP Camera Tool’. ActiveX controller will
be installed simultaneously (recommended).
2. Download ActiveX controller and set the Security
Properties of IE on the PC when you view it for the
first time: Go to Tools > Internet Properties >
Security > Custom Level > ActiveX control and
Plug-ins. All 3 options need to be set to ‘Enable’.
- Enable: Download unsigned ActiveX controls.
- Enable: Initialize and script ActiveX controls not
marked as safe.
- Enable: Run ActiveX controls and plug-ins.