User Manual

Nexxt Solutions - Integrated Wireless IP Camera
55
Problems with network bandwidth
The image frame rate depends on the following
factors:
1. Network bandwidth.
2. PC performance, network environment and
display preference setting (brightness, theme, etc).
3. The number of visitors (too many visitors will slow
down the image frame rate).
4. Choice of switch or hub (use a switch for multiple
IP cameras rather than a hub).
Pop up appears saying
‘Fail to connect to the device’
This prompt will only appear when using multiple
cameras. Enter the Multi-Device Settings page (log
in as an Administrator) to check whether the Device
settings are correct.
When one of the multiple cameras disconnects,
the icon changes color to yellow and the pop-up
prompt “Failed to connect to the device” is
displayed.
Can’t access the IP camera on the internet?
There could be a number of reasons:
1. ActiveX controller is not installed correctly.
2. The port IP camera being used is blocked by
Firewall or an anti-virus software. Use a different
port number and try again.
3. Port mapping failed. There are two ways available
for configuring port mapping:
Open the setting page of the router which the IP
camera connects with to allow the UPNP function.
