User's Manual

Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
3
This camera is intended for indoor use only.
Use the supplied power adaptor to connect the
camera to the AC mains (5.0V DC, 1.5A).
The warranty does not cover any damage caused
by applying the wrong voltage.
Never attempt to disassemble the unit. The warran-
ty does not cover damages as a result of tampering
with, or the improper alteration of the device.
Do not point the camera at the sun or at any other
strong light source.
Do not install the camera where it can be exposed
to rain or water
Wait at least 10 seconds when powering the
camera on and off. Otherwise, it can cause serious
damage to the CPU.
When updating the camera, please make sure that:
the camera is connected directly to a computer
using a network cable;
all other programs and windows on the computer
have been closed;
the camera remains connected during the entire
firmware update.
•
•
•
•
•
•
•
-
-
-
BEFORE YOU BEGIN