User's Manual

Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
35
If network cable and power supply are correctly
connected, the device type, name and IP address
will be shown in the device list. (Otherwise, please
confirm whether the power supply and network
cable are functional).
In the interface above, the configuration information
of the current computer is listed on the left side; the
network configuration information of the selected
camera is listed on the right side. The default IP
address in this example is 192.168.1.126, and the
HTTP port is 81.
Inner Access refers to the LAN access address.
Outer Access refers to the WAN access address.
Tip: Port forwarding setting is necessary for
outer access, please refer to the router port
forwarding section of the manual.
Device information exhibits the IP camera basic
parameters.
2.When the current computer has a fixed IP
(namely non-DHCP IP), and the IP camera is used


