User's Manual

Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
36
for the first time, please click Update, so that IP
address of the IP camera, gateway and DNS can be
synchronous with the PC.
3. If it is necessary to manually modify the contents
including camera name, HTTP port, IP address,
submask, gateway, primary DNS server, secondary
DNS server and so on, you must click apply after
changes are made, and then click OK for access
validation after entering the username and
password of the IP camera in the pop-up dialog box.
System Login
Open the Web page. You can open it directly by
clicking the Inner Access or Outer Access on the
IP Camera Finder, followed by the Open button
located in the same dialog box. You can also directly
input the corresponding address of the inner and
outer access into the address bar of the web
page, as the address shown in the picture above
http://192.168.1.126:81 (LAN); and http://
aodn.ipcam.so (WAN). If the IP camera has been
connected with the external network, the log-in
interface below will appear when you open the web
page through the LAN or the external network: