User's Manual

Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
47
When users check “show date timestamp on video”,
a timestamp will be added in the bottom right
corner of recorded footage.
Mail Service Settings
The mail service is mainly used to send email
notifications in case an alarm is triggered. The user
can set the program to send an email every time the
alarm goes off.
Sender: the mailbox belonging to the sender
Receiver 1, 2, 3, 4: recipients’ email addresses
SMTP server: this is the outgoing mail server
address. It might be used to scan specific
parameter values.
SMTP port: this is the outgoing mail server port;
usually this is set to 25.
Need Authentication: determines if authorization is
needed to send emails. Common communications
are required to authenticate. You need to fill in the
mail’s login account and password accordingly.
Test: when you click this button, the IP camera will
send a test e-mail and verify if it was was sent.
Note: make sure the DNS server and gateway
configuration under basic network settings have
been done correctly.