User's Manual

Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
49
Alarm Service Settings
This is used to set the alarm functions on the
camera. The XP 330 supports motion detection and
external alarm inputs. Motion detection means that
the IP camera will sense movement and immediately
it will trigger an alarm to alert about such an event.
Sensitivity can be determined in a scale from 1 to
10, 1 being the setting with the highest sensitivity,
while 10 represents the lowest level of motion
sensitivity you can preset.
Alarm actions include presets, alarm output, mail
notifications, and FTP uploading of pictures.
Input pins - The input pins can be used for a one-
way external sensor input. For example, you can
connect a Passive Infrared Sensor (PIR) to it for
motion detection. When an external sensor is
triggered, the IP camera can be programmed to
send an email with an image snapshot or control
the internal relay output. If you link an external alarm
with Pin 3 and Pin 4, and check the box of the
alarm input, the external alarm will be enabled (this
only applies to the models that have this feature
available).
Send Mail on Alarm - Sends picture & mail
information to the set email address after the alarm
is triggered.
Upload Image on Alarm - Enable this function to
upload an image after the alarm is triggered.
Scheduler - You can set the time range for the
motion alarm to be triggered. Schedules can be set