User's Manual

Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
56
4. Under Service Port and Internal Port field,
input the incoming port for the IP camera (in this
example, it will be 81). In the IP Address field, type
the camera’s IP address (in this example, it will be
192.168.0.100). Under the Protocol drop-down
menu, you have the option to set it to UDP, TCP,
or ALL. We recommend setting it to ALL, but you
can set the option that best fits your configuration.
Next, from the drop down menu, set the Status
to Enabled in order to activate this feature. Leave
the Common Service Port unchanged unless your
Service Port number was changed from the default,
which is 81. Lastly, click Save to store the newly
applied settings.
The following picture illustrates the successful
enablement of Port Forwarding. You can now
access your camera externally utilizing the IP
address.