User Manual

Nexxt Solutions - Integrated Wireless IP Camera
7
2. Plug the other end into an available RJ-45 port
on your router.
3. Connect the power cable to the wall outlet.
Please note that if you are using the camera on
a wireless network, you will need to configure the
camera for wired use, prior to configuring
wireless settings in the device (later described in
this manual).
Accessing the IP camera
Using the IP Super Client Software
Note: The IP network camera is designed to work in
a local area network (LAN) or over the internet. For
the first method, we highly recommend using the
software included in the CD. The installation steps
are described below.
1. Introduction
The IP camera Super Client is an easy-to-use
software designed for surveillance applications
with multiple cameras. This software includes PT
controls, recording, alarm notifications, in
addition to a central management feature that
allows the administration, configuration and
access control settings for each individual device.