User's Manual

Nexxt Solutions - NetGate Wireless Access Point
18
4.1 Login
4.2 Status
Chapter 4
AP client router & AP router operation mode
This Chapter describes how to configure some advanced settings for your Access Point
through the web-based management page. In the following sections, we will use the device in
AP Client Router operation mode as example.
In this screen, you will be able to view the AP’s current status and configuration settings, all of
which are read-only.
After your successful login, you can configure and manage the Access Point.. There are
fourteen main menus on the left of the Web-based management page. Submenus will be
available after you click one of the main menus. The fourteen main menus are: Status,
Quick Setup, Operation Mode, Network, Wireless, DHCP, Wireless Settings, Forwarding,
Security, Static Routing, IP & MAC Binding, Dynamic DNS, SNMP and System Tools. On the
right of the Web-based management page, you will find detailed descriptions and instructions
for the corresponding page. To apply any settings you have altered on the page, please click
Save.
For a description of each Web page key functions, please refer to the sections below.
Figure 4-1 Status