User's Manual

Nexxt Solutions - NetGate Wireless Access Point
51
Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X represents any hexadecimal digit).
For example: 00-0E-AE-B0-00-0B.
Enter a short description of the PC in the Description field. Fox example: John’s PC.
Status - Select Enabled or Disabled for this entry, from the Status pull-down list.
Click the Save button to confirm this entry.
Click the Modify button next to the entry you want to change. If you want to erase the
entry, click the Delete button.
Proceed with the changes you want to make.
Click the Save button once you are done.
1.
2.
3.
4.
1.
2.
3.
To add or modify a MAC Address Filtering entry, follow these instructions:
To add additional entries, repeat steps 1-4.
When finished, click the Return button to go back to the MAC Address Filtering page.
To modify or delete an existing entry:
Click the Enabled All button to activate all entries .
Click the Disabled All button to cancel all entries.
Click the Delete All button to erase all entries
Click the Next button to go to the following page and click the Previous button to return to the
last page.
Fox example: If you want to block the PC with MAC addresses 00-0A-EB-00-07-BE and
00-0A-EB-00-07-5F from accessing the Internet, first, enable the Firewall and MAC Address
Filtering on the Firewall page. Then, you should specify the Default MAC Address Filtering Rule
Deny these PC(s) with effective rules to access the Internet on the Firewall page, and include
the following MAC address filtering list on this page:
Figure 4-41 Add or Modify a MAC Address Filtering entry