User's Manual

Nexxt Solutions - NetGate Wireless Access Point
55
Click the Enabled All button to activate all entries.
Click the Disabled All button to cancel all entries.
Click the Delete All button to erase all entries.
To modify or delete an existing entry:
4.12 IP & MAC binding
ARP Binding is useful for controlling access of specific computers in the LAN. This page displays
the IP & MAC Binding Setting table; which you can configure based on your particular needs.
There are two submenus under the IP & MAC Binding menu (shown in Figure 4-46):
Binding Setting and ARP List. Click any of them in order to configure the corresponding function.
Detailed descriptions for each submenu are provided below.
Select Enabled or Disabled for this entry from the Status pull-down list.
Click the Save button to keep your settings.
Click the Modify button next to the entry you want to change. If you want to erase the entry,
click the Delete button.
Proceed with the changes you want to make.
Click the Save button when done.
3.
4.
1.
2.
3.
!
Figure 4-45 Add or Modify a Static Route Entry
Figure 4-46 the IP & MAC Binding menu