User's Manual

Nexxt Solutions - NetGate Wireless Access Point
56
4.12.1 Binding setting
Go to IP & MAC Binding > Binding Setting in order to configure the binding parameters,
as shown in Figure 4-47.
When you want to add or modify an IP & MAC Binding entry, you can click the Add New button
or Modify button, and then you will be directed to the next page. This page is used for adding or
modifying an IP & MAC Binding entry (shown in Figure 4-48).
To add IP & MAC Binding entries, follow the steps below.
To modify or delete an existing entry, follow the steps below.
MAC Address - The MAC address of the monitored computer in the LAN.
IP Address - The assigned IP address of the monitored computer in the LAN.
Bind - Check this option to enable ARP binding for a specific device.
Modify - Use this link to edit or delete an existing entry.
•
•
•
•
Click the Add New... button, as shown in Figure 4-48.
Enter the MAC Address and IP Address.
Select the Bind checkbox.
Click the Save button to accept your changes.
Find the desired entry in the table.
Click Modify or Delete as desired, on the Modify column.
1.
2.
3.
4.
1.
2.
Figure 4-47 Binding Setting
Figure 4-48 IP & MAC Binding Setting (Add & Modify)