User's Manual

Nexxt Solutions - NetGate Wireless Access Point
57
4.12.2 ARP list
To find an existing entry, follow the steps below.
Go to IP & MAC Binding > ARP List in order to see the IP addresses on the LAN and their
associated MAC addresses included in the ARP list.
You can also use the list to configure the corresponding parameters from there. (Figure 4-50).
Click the Bind All button to bind all the current items. This option is only available when the ARP
binding is enabled.
Click the Load All button to include all items in the IP & MAC Binding list.
Click the Refresh button to update all items.
MAC Address - The MAC address of the monitored computer in the LAN.
IP Address - The assigned IP address of the controlled computer in the LAN.
Status - Indicates whether or not the MAC and IP addresses are bound.
Configure – To load or delete an item.
Load - To load the item into the IP & MAC Binding list.
Delete - To erase the item.
•
•
•
•
•
•
Click the Find button, to open the window.
Enter the MAC Address or IP Address.
Click the Bind button on the page, as shown in Figure 4-49.
Click the Enabled All button to activate all entries .
Click the Delete All button to erase all entries.
1.
2.
3.
Figure 4-49 Find IP & MAC Binding Entry
Figure 4-50 ARP List