User's Manual

Nexxt Solutions - NetGate Wireless Access Point
43
To modify or delete an existing entry, please complete the steps below:
Note:
Click the Enable All button to activate all entries.
Click the Disabled All button to cancel all entries.
Click the Delete All button to erase all entries.
Click the Modify button next to the entry you want to change. If you want to delete that entry,
click the Delete in this stage.
Proceed with the changes you want to make.
Click the Save button when you are done.
When the trigger connection is released, will cause the closing of the corresponding opened
ports.
Each rule can only be used by one host on the LAN at a time. The trigger connection of other
hosts on the LAN will be refused.
Incoming Port Range enabled cannot overlap each other at the same time.
1.
2.
3.
1.
2.
3.
4.9.3 DMZ (Demilitarized Zone)
Go to Forwarding > DMZ in order to set up an DMZ host on this page, as shown in
Figure 4-32.
Figure 4-31 Add or Modify a Triggering Entry
Figure 4-32 DMZ