User's Manual

Nexxt Solutions - NetGate Wireless Access Point
46
4.10.1 Firewall
Go to Security > Firewall in order to enable the main firewall screen, as shown in Figure 4-35.
The default setting for the switch is off. Turning the general firewall switch to off will disable IP
Filtering, Domain Filtering and MAC Filtering even if their individual settings are enabled.
Enable Firewall - Check this box to activate the Firewall.
Enable IP Address Filtering - Check this box to activate IP Address Filtering on the AP. There are
two default filtering rules for IP Address Filtering: Allow or Deny the packets specified to pass
through the router.
Enable Domain Filtering - Check this box to enable Domain Filtering.
Enable MAC Filtering - Check this box to activate MAC Address Filtering on the AP. There are
two default filtering rules for MAC Address Filtering: Allow or Deny the packets specified to pass
through the router.
•
•
•
•
Figure 4-35 Firewall Settings