User's Manual

Nexxt Solutions – Wireless-N 3G router

Note: To build a successful connection via WPS, you should also conﬁgure the new device for

WPS in the meantime.

In order to conﬁgure the new device, we are going to use the Lynx Wireless Adapter from

Nexxt Solutions as an example.

If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Conﬁguration

(PBC), you can add the device to the network by executing any of the two following methods.

First method:

Step 1: Click the Enable WPS button to trigger the WPS function in Figure 3-7, and click the

Add device button in Figure 3-7, then the following screen will appear.

Step 2: Choose Press the button of the new device in two minutes and click Connect.

Step 3: For the conﬁguration of the wireless adapter, please choose Push the button on my

access point in the conﬁguration utility of the WPS as below, and click Next.

I. PBC conﬁguration

Figure 3-7 Add a new device

Figure 3-8 The WPS Conﬁguration Screen of Wireless Adapter