User's Manual

Nexxt Solutions – Wireless-N 3G router
28
Figure 3-20 3G USB Modem settings
To add 3G USB Modem entries, follow the steps below.
There is already much 3G USB modem information embedded in the router. The USB
modem parameters will be set automatically if the card is supported by the router. But when
the router finds the card you just insert “unknown” to it, it will prompt you to set these param-
eters. The router can identify your “unknown” card if the correct parameters are in the list.
We suggest you to do the “3G USB Modem Setting” only in such circumstance.
Download a most recent 3G USB modem configuration file from our website.
Click the Add New... button in Figure 3-20, and then you will see Figure 3-21.
Click Browse… to select the path name where you save the downloaded file on the
computer into the File blank.
Click the Upload button to upload the configuration.
If your ISP provides the DHCP service, please select Dynamic IP, so that the router will
automatically get IP parameters from your ISP. The page that pops up at this stage looks
like the one below (Figure 3-22):
Go to Network WAN in the menu, in order to configure the IP parameters of the WAN on
the screen, as shown below.
Note: WAN settings are unavailable when the Internet Access mode is set to 3G Only mode.
Please change settings on 4.6.1 Internet Access if you want to use WAN.
1.
2.
3.
4.
1.
Figure 3-21 Add or Modify a 3G USB Modem entry
4.6.3 WAN