User's Manual

Nexxt Solutions – Wireless-N 3G router
33
Detect online interval - Access Concentrator online detection that the router will run at
the specified interval. The default value is “0”. You can select any number between “0” and
“120”. A “0” setting means no detection.
DNS IP address - If your ISP does not automatically assign DNS addresses to the router
during login, please click Use the following DNS servers check box and enter the IP address
in dotted-decimal notation of your ISP’s primary DNS server. If a secondary DNS server ad-
dress is available, enter it as well.
Click the Save button to store your settings.
User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
Auth server - Enter the authenticating server IP address or host name.
Auth domain - Type in the domain suffix server name based on your location.
e.g.
NSW / ACT - nsw.bigpond.net.au
VIC / TAS / WA / SA / NT - vic.bigpond.net.au
QLD - qld.bigpond.net.au
•
•
•
•
•
Figure 3-26 WAN –BogPond cable
If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond
Cable. Proceed to fill in the following parameters, as shown below (Figure 3-26):
4.