User's Manual

Nexxt Solutions – Wireless-N 3G router
45
Figure 6-10
6.4 Wireless advanced settings
To modify or delete an existing entry:
Click the Modify button next to in the entry you want to change. If you want to erase this
entry, click on Delete.
Proceed with the changes you want to make.
Click the Save button to save your settings.
Click the Enable button to activate this function.
Select the radio button: Deny the stations not specified by any enabled entries in the list
to access for Filtering Rules.
Delete all or disable all entries, if there are any entries already.
Click the Add New button and enter the MAC address 00-0A-EB-00-07-8A /00-0A-EB-00-
23-11 in the MAC Address field; then enter wireless station A/B in the Description field,
while selecting Enabled in the Status field. Click the Save and the Back button to complete
this procedure.
The filtering rules just configured should look similar to the following list:
Go to Wireless Wireless Advanced in the menu, in order to configure the advanced set-
tings of your wireless network.
Click the Enable All button to activate all entries
Click the Disabled All button to cancel all entries.
Click the Delete All button to erase all entries
Click the Next button to go to the following page
Click the Previous button to return to the last page.
For example: If you want wireless station A with MAC address 00-0A-EB-00-07-8A and wire-
less station B with MAC address 00-0A-EB-00-23-11 to be able to access the router, while all
the other wireless stations are denied access, you must configure the Wireless MAC Ad-
dress Filtering feature using the steps detailed below:
1.
2.
3.
1.
2.
3.
4.