User's Manual

Nexxt Solutions – Wireless-N 3G router
50
MAC Address – The MAC Address of the PC that you want to reserve an IP address for.
Reserved IP Address - The IP address that the device reserved.
Status – It shows whether the entry is enabled or not
Modify – Use this link to modify or delete an existing entry.
To reserve IP addresses:
8. Forwarding
•
•
•
•
Click the Add new button. (The dialog box as shown in Figure 7-5 will appear).
Enter the MAC address (in XX-XX-XX-XX-XX-XX format) and the IP address in dotted-decimal
notation belonging to the computer you wish to add.
Click the Save button when finished.
Click the Modify button next to the entry you want to change. If you want to erase this en-
try, click on Delete.
Proceed with the changes you want to make.
Click the Save button.
Click the Enable All button to activate all entries
Click the Disabled All button to cancel all entries.
Click the Delete All button to erase all entries
Click the Next button to go to the following page
Click the Previous button to return to the last page.
1.
2.
3.
1.
2.
3.
Figure 7-5 Add or Modify an Address Reservation Entry
Figure 8-1 Forwarding menu
To modify or delete an existing entry: