User's Manual

Nexxt Solutions – Wireless-N 3G router
81
Figure 15-3 System routing table
Note:
Time zone - Select your local time zone from this pull down list.
Date - Enter your local date in MM/DD/YY into the corresponding blank fields.
Time - Enter your local time in HH/MM/SS into the corresponding blank fields.
NTP Server prior - Enter the address for the NTP Server, then the router will preferentially
obtain the time from the NTP Server. In addition, the router can automatically update the
time from any enabled NTP server once it connects to the Internet.
To set time manually:
For automatic time synchronization:
To enable Daylight Saving:
•
•
•
•
Select your local time zone.
Enter the Date in Month/Day/Year format.
Enter the Time in Hour/Minute/Second format.
Click Save.
This setting will be used for some time-based functions, such as firewall. You must specify
your time zone once you successfully login to the router; otherwise, time dependent func-
tions will fail to work.
The time will be lost if the device is turned off.
The device will obtain the GMT automatically from the Internet if it is configured accordingly.
In daylight saving configuration, the start and end times shall be within the same year, in
which the start time should be earlier than the end time.
The daylight saving function starts working one minute after being enabled.
Check the Enable Daylight Saving box to enable this function.
Define the span of time during which you want this feature to work. For example, if you
want this feature to be effective from 0 o’clock (am) on the 1st Sunday of April until at 6
o’clock (pm) on the 2nd Saturday of September, enter “Apr”, “1st”, “Sun”, “0am” in the
Start field, followed by “Sep”, “2nd”, “Sat”, “6pm” in the End field.
Click the Save button for the new settings to take effect.
Enter the address or domain of the NTP Server I or NTP Server II.
Click the Get GMT button to obtain the system time from the Internet
1.
2.
3.
4.
1.
2.
3.
4.
5.
1.
2.
3.
1.
2.