User's Manual

IP CAMERA User Manual
16
alarm, please choose “close”.
2） Alarm Action
After every trigger of alarm during the scheduled time, the device can trigger alarm in
several ways.
¾ IO interface for alarm signal output: when relay was switched on (please refer to
Picture 3), the external alarm will begin to alarm.
¾ Send alarm info by email.
¾ Send the site pictures to the FTP server, user can also set the break time between
two pictures.
¾ Send alarm info to the alarm server.
3） Scheduler
Device will trigger alarm in scheduled time. User can set schedule time to be “all the
time”. Please set the system time, time zone, and select the scheduled time. Please refer
to the Picture 17.
Figure 17
7.2.2 Mail Service Setting
The device will send alarm email to the email address was filled in. Please do the mail
settings properly fist, Picture 18 is a mail setting page for your reference. After the setting,
please click save and test to check if it works properly.
If have already set the mail server properly, user can tick to enable “Report Internet IP by
mail”. After every restart, the device will send its Internet IP address to user’s email