User's Manual

IP CAMERA User Manual
24
Audio Out Audio Line-out interface x 1
Physical
Index
Weight 298g
Main body 108mm(L)*109mm(W)*131mm(H)
Power DC 5V
Power consumption <6W
Operating
temperature
-20 ~ 45℃℃
Operating
temperature
10% ~ 80% non-condensing
Software(PC
Side)
OS Supported Microsoft Windows 98/2000/XP/Vista etc.
Browser
Internet Explorer6.0 and Above or Compatible
Browser, Firefox, Safari etc.
Application
Software
IPCMonitor.exe
10 FAQ
1) Unmatched power adapter will damage the equipment or power adapter
When plug in the power adapter , please check carefully the voltage , it should be 5V
adapter for this equipment.
2) Slowly browse speed
This equipment adopts MJEPG compression format, it needs large network bandwidth,
the narrow bandwidth will affect the browse speed . The typical bandwidth uses situation
as below:
640x480@10fps : 4.0 Megabits ～ 5.0 Megabits
320x240@30fps : 1.2 Megabits ～ 1.6 Megabits
3) Can’t find equipment via search software after connect to LAN
Make sure the equipment and PC is in the same LAN; if install firewall software, please
close it and try again.
4) Can find equipment via search software, but can’t visit
If the IP address of IP camera and PC is not in the same Network Segment, you should
change them on the same Network Segment before visit. Network Segment is the first
three number of IP address. If the IP address of PC is 192.168.0.100, so it can only visit
the equipment which IP address is between 192.168.0.1~192.168.0.255.
5) Can’t visit the equipment via Internet
Please refer to:
Chapter 4 (Figure 3) to check if the internet connection is correct;