User's Manual

IP CAMERA User Manual
9
automatically and pop up a window at the same time which requires to inputting the
user name and password. Then you see the home page of the IP Camera-1, click
“English” on the right-top corner, just as below Figure 7. On the right corner of the
interface, user can choose the language.
Figure 6
If you have the firewall software in your PC, when you run the
HSearch_en.exe, it may pop up a window to say if you want to block this
program or not, then you should choose not to block.
IP Camera by default use fixed IP address 192.168.0.178 and fixed http port
80. If you don’t have this software, you could also press down the reset button
to go back the factory setting. Then you could use this defaulted IP address to
visit the IP Camera.