Installation Instructions

ARL02754U1 AC750 Wireless Dual Band Gigabit Router
- 26 -
Set DNS server manually - If your ISP gives you one or two DNS addresses, select Set DNS
server manually and enter the primary and secondary addresses into the correct fields.
Otherwise, the DNS servers will be assigned automatically from your ISP.
Note:
If you find error when you go to a website after entering the DNS addresses, it is likely that
your DNS servers are set up improperly. You should contact your ISP to get DNS server
addresses.
Host Name - This option specifies the Host Name of the router.
Click the Save button to save your settings.
2. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select
Static IP. The Static IP settings page will appear, shown in Figure 4-4.
Figure 4-4 WAN - Static IP
IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually
is 255.255.255.0.
Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation provided by
your ISP.
Primary DNS Server/Secondary DNS Server- (Optional) Enter one or two DNS addresses
in dotted-decimal notation provided by your ISP.