Installation Instructions

ARL02754U1 AC750 Wireless Dual Band Gigabit Router
- 42 -
Figure 4-14 WDS Setting
 SSID (to be bridged) - The SSID of the AP your router is going to connect to as a client.
You can also use the search function to select the SSID to join.
 MAC Address (to be bridged) - The BSSID of the AP your router is going to connect to
as a client. You can also use the search function to select the BSSID to join.
 Scan - Click this button, you can search the AP which runs in the current channel.
 Key type - This option should be chosen according to the AP's security configuration. It is
recommended that the security type is the same as your AP's security type
 WEP Index - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).
It indicates the index of the WEP key.
 Authentication Type - This option should be chosen if the key type is WEP(ASCII) or
WEP(HEX). It indicates the authorization type of the Root AP.
 Encryption - When WPA is set as the Authentication Type, you can select either TKIP or
AES as Encryption.
 Password - If the AP your router is going to connect needs password, you need to fill the
password in this blank.
4.6.2 WPS
Choose menu “Wireless 2.4GHz →WPS”, you can the screen as shown in Figure 4-15. This
section will guide you to add a new wireless device to an existing network quickly by WPS (Wi-Fi
Protected Setup) function.