Installation Instructions
ARL02754U1 AC750 Wireless Dual Band Gigabit Router
- 60 -
If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you will find
a notice in red as shown in Figure 4-35.
Figure 4-35 WPA/WPA2 – Personal
• Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8
to 64 Hexadecimal characters. The default password is the same with the default PIN
code, which is labeled on the bottom of the router or can be found in Figure 4-30.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WPA /WPA2- Enterprise - It’s based on Radius Server.
• Authentication Type - you can choose the version of the WPA security on the drop-down
list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or
WPA2 (WPA version 2) automatically based on the wireless station's capability and
request.
• Encryption - You can select either Automatic, or TKIP or AES.
Note:
If you check the WPA/WPA2-Enterprise radio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-36.
Figure 4-36 WPA/WPA2 - Enterprise
• Radius Server IP - Enter the IP address of the Radius server.
• Radius Server Port - Enter the port number of the Radius server.
• Radius Server Password - Enter the password for the Radius server.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.