Installation Instructions

ARL02754U1 AC750 Wireless Dual Band Gigabit Router
- 80 -
Figure 4-58 The Forwarding menu
 Enable NAT Control - If enabled, the NAT function and the Forwarding configuration will take
effect.
 Disable NAT Control - If disabled, neither NAT function nor Forwarding configuration will take
effect.
 Enable Hardware NAT Control - If enabled, the Hardware NAT feature will take effect.
 Disable Hardware NAT Control - If disabled, neither Hardware NAT feature will take effect.
Figure 4-59 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 4-59): Virtual Servers,
Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the
corresponding function.
4.12.1 Virtual Servers
Choose menu “Forwarding→Virtual Servers”, and then you can view and add virtual servers on
this page (shown in Figure 4-60). Virtual servers can be used for setting up public services on
your LAN. A virtual server is defined as a service port, and all requests from Internet to this service
port will be redirected to the computer specified by the server IP. Any PC that was used for a
virtual server must have a static or reserved IP address because its IP address may change when
4.12
Forwarding