Installation Instructions

ARL02754U1 AC750 Wireless Dual Band Gigabit Router
- 86 -
 Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or Disable
button. This feature is enabled by default.
 Current UPnP Settings List - This table displays the current UPnP information.
 App Description - The description about the application which initiates the UPnP request.
 External Port - The port which the router opened for the application.
 Protocol - The type of protocol which is opened.
 Internal Port - The port which the router opened for local host.
 IP Address - The IP address of the local host which initiates the UPnP request.
 Status - Either Enabled or Disabled. "Enabled" means that the port is still active; otherwise,
the port is inactive.
Click the Enable button to enable UPnP.
Click the Disable button to disable UPnP.
Click the Refresh button to update the Current UPnP Settings List.
Figure 4-66 The Security menu
There are four submenus under the Security menu: Basic Security, Advanced Security, Local
Management and Remote Management. (as shown in Figure 4-66). Click any of them, and you
will be able to configure the corresponding functions.
4.13.1 Basic Security
Choose menu “Security → Basic Security”, and then you can configure the basic security in the
screen as shown in Figure 4-67.
4.13
Security