Installation Instructions

ARL02754U1 AC750 Wireless Dual Band Gigabit Router
- 88 -
 L2TP Passthrough - Layer Two Tunneling Protocol (L2TP) is the method used to enable
Point-to-Point sessions via the Internet on the Layer Two level. To allow L2TP tunnels to
pass through the router, click Enable.
 IPSec Passthrough - Internet Protocol security (IPSec) is a suite of protocols for ensuring
private, secure communications over Internet Protocol (IP) networks, through the use of
cryptographic security services. To allow IPSec tunnels to pass through the router, click
Enable.
 ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG allows
customized Network Address Translation (NAT) traversal filters to be plugged into the gateway
to support address and port translation for certain application layer "control/data" protocols
such as FTP, TFTP, H323 etc.
 FTP ALG - To allow FTP clients and servers to transfer data across NAT, click Enable.
 TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, click Enable.
 H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT, click
Enable.
 SIP ALG - To allow SIP clients and servers to communicate across NAT, click Enable.
 RTSP ALG - To allow some media player clients to communicate with some streaming
media servers across NAT, click Enable.
Click the Save button to save your settings.
4.13.2 Advanced Security
Choose menu “Security → Advanced Security”, and then you can protect the router from being
attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood in the screen as shown in Figure 4-68.