Specifications

第
3
页 共
10
页
4
Drop test
Test conditions:
1. Drop the 6 sides of the carton (Figure 1)
Figure 1
2. The distance between the product and the floor steel plate is 80
CM(Figure 2)
Figure 2
Experiment method：
1. First, fix the packing box to be tested on the product bracket to
fix and clamp the test sample. The clamping force should be
appropriate to avoid pinching the tested sample.
2. Adjust the drop height 80CM.
3. First turn on the main power switch and connect the trachea.
4. After the work is completed, disconnect the trachea and the
power switch, and remove the sample.
1. After the test, the packing
box should not have
obvious damage.
2. After the test, inspect the
product, and there must be
no defects after the
electrical & external
inspection.
7
Coaxial Wire Material Addendum
80CM