User's Manual

Nexxt Solutions – Wireless-N 3G router
52
Figure 8-3 Add or Modify a Virtual Server Entry
To modify or delete an existing entry:
8.2 Port triggering
Note: If your computer or server has more than one type of service available, please select a
different service, and enter the same IP Address for that computer or server.
Click the Modify button next to in the entry you want to change. If you want to erase this
entry, click on Delete.
Proceed with the changes you want to make.
Click the Save button.
Click the Enable All button to activate all entries
Click the Disabled All button to cancel all entries.
Click the Delete All button to erase all entries
Click the Next button to go to the following page
Click the Previous button to return to the last page.
Note: If you set the service port of the virtual server as 80, you must set the Web manage-
ment port on System Tools –> Remote Management page to be any other value except 80,
such as 8080. Otherwise, there will be a conflict to disable the virtual server.
Go to Forwarding Port triggering in the menu, in order to visualize and add port trigger-
ing, as shown in the next screen (Figure 8-4). Some applications require multiple connections,
like Internet games, video conferencing, Internet calling, and so on. These applications can-
not work with a pure NAT router. Port Triggering is used for some of these applications to let
them work with a NAT router.
1.
2.
3.
Figure 8-4 Port Triggering